One perk of having your security system installed by trained experts is that you hardly ever have to concern yourself with it. Even so, there will likely be a few instances where you need to reset your alarms in Eau Claire. If you use a smart command interface, a reset normally needs only a couple tap of a button after a false alarm, power outage, or battery change.
Consult Your Instruction Manual Before Resetting Your Alarm
Here’s a simple yet valuable tip before you try to reset your Eau Claire home security system, read your instruction manual ahead of time. You’ll never want to compromise your system due to pressing a button in error. In addition, control panels might be different if you moved from a numbered keypad to a modernized touchscreen interface. If there’s ever a time when you can't reset your system, don't worry as you can always call the professionals.
Resetting Your Eau Claire Home Security System After A False Alarm
Generally, a false alarm takes place because of an accidentally tripped sensor. You are able to utilize the central hub or bring up your ADT smartphone app and tap the shield image and type in your unique passcode to deactivate the system for these instances. You may get a call from your 24-hour monitoring specialists, but just tell them you had a false alarm.
Resetting Your Alarm When Experiencing A Power Outage In Eau Claire
If power is lost from lighting, strong winds, or other reasons, you might start to hear a beeping sound from your control panel. This lets you know that your home’s defense is using the battery backup. To reset your equipment and silence the steady beeps, you need to take steps to disarm and rearm your security.
However, if your power outage lasts for an extended time, you may need a full system reset. Pay careful attention to the instructions in the instruction manual -- usually by entering your PIN number and tapping the off button two times -- and you should be back in business. You could still hear chirping caused by the secondary power source, as it might not stop until your battery reaches a full charge. Contact your home security agent if you continue to have problems with your ADT equipment at least 20 hours after power is restored.
How To Reset Your Home Security System After Replacing A Battery
There will be infrequent times when you will have to replace a battery within one of your home security components. To do this, you want to set your alarm system to "Test Mode" so you don't trigger a false alarm. After the new battery is put in place, change the alarm out of Test Mode and restore normal operations. If the control panel doesn't register the component or the battery indicator remains on, you may need a total reset of the system.
Tips to Reset Your Eau Claire Security System Following The Addition Or Deletion Of Someone
Removing or adding users can be done on your ADT Command hub and your ADT smartphone app. You shouldn't need a system reset when deleting or adding users. However, if you move into a new house already equipped with an ADT security system, you should reach out to your home security professional at (715) 255-6964 to set up a new service. The installer will visit your property to upgrade outdated parts, install other devices (if needed), and reset the system for you.
A User-Friendly Security System Is Only A Call Away
Attempting to reset a home security system in Eau Claire can be difficult if it fails to include understandable instructions and features. If the time has come to find your easy-to-use home protection system, dial (715) 255-6964 or send in the form below. Our team is ready to help customize the perfect security system for your needs.