Where To Place Carbon Monoxide Detectors In Your Eau Claire Home
Homeowners must protect against a variety of risks like fire, burglary, and flooding. But what about a danger that you are unable to smell or see? Carbon monoxide presents unique challenges because you might never realize it’s there. Even so, implementing CO detectors can simply shield you and your household. Learn more about this dangerous gas and where to place carbon monoxide detectors in your Eau Claire residence.
What Is Carbon Monoxide?
Referred to as the silent killer because of its lack of color, taste, or odor, carbon monoxide is a common gas produced by incomplete fuel combustion. Any appliance that utilizes fuels like an oven or furnace may produce carbon monoxide. While you usually won’t have any trouble, complications can present when an appliance is not routinely maintained or appropriately vented. These oversights can lead to a proliferation of this potentially deadly gas in your residence. Generators and heating appliances are commonly culpable for CO poisoning.
When subjected to minute amounts of CO, you might experience headaches, dizziness, fatigue nausea, or vomiting. Extended exposure to elevated levels may lead to cardiopulmonary arrest, and even death.
Suggestions On Where To Place Eau Claire Carbon Monoxide Detectors
If you don’t use a carbon monoxide detector in your home, get one today. Ideally, you should use one on each floor, and that includes basements. Here are a few suggestions on where to place carbon monoxide detectors in Eau Claire:
- Put them on every floor, especially where you have fuel-burning appliances, including fireplaces, furnaces, water heaters, and gas dryers.
- You ought to always have one within 10 feet of bedroom areas. If you only get one carbon monoxide detector, this is the place for it.
- install them approximately 10 to 20 feet away from sources of CO.
- Do not install them immediately beside or above fuel-burning appliances, as a small degree of carbon monoxide may be emitted when they turn on and trigger a false alarm.
- Attach them to walls about five feet from the floor so they can sample air where people are breathing it.
- Avoid putting them beside doors or windows and in dead-air areas.
- Install one in rooms above attached garages.
Inspect your CO detectors regularly and maintain them in accordance with manufacturer guidelines. You will typically have to replace units every five to six years. You should also make sure any fuel-utilizing appliances are in in proper working condition and appropriately vented.